Syvecs GDI4 Stand Alone ECU

£3,300.00 (+VAT)

The Syvecs GDI4 Stand Alone Engine Management System (ECU) is the perfect solution for integrated direct injection engine management. Based on the highly popular S8 architecture, the GDI4 just has less inputs and outputs for those GDI applications that don’t require the complexity of the full S8.

Description

The Syvecs GDI4 Stand Alone Engine Management System is designed to directly control and drive all Gasoline Direct injectors including parts from Ford, GM and Bosch (including Bosch Motorsport types) without the need for an external driver box. As standard it caters for 4 Cylinder engines but we can provide for more cylinders via the use of the Syvecs S12 ECU and GDI Boxes.

In addition, the Syvecs GDI4 is cased in a sealed aluminium billet unit and comes with 1 x waterproof connectors offering 88 pins.

Syvecs GDI4 Specification:

Inputs

  • 24 x General Purpose Analogue Inputs:
    • 16 x 5V/Bipolar, Sensor/Sync/Speed, Programmable Trigger Voltages
    • 4 x 5V Sensor Input
    • 4 x Thermistor Sensor Input
  • 2 x NTK Lambda Inputs
  • 2 x K-Type Thermocouple Circuit
  • 2 x Knock Input

Outputs

  • 24 x High/Low Side Driver Outputs:
    • 4 x Half Bridge Outputs (Max 10 Amps)
    • 12 x Low Side Injection/PWM Outputs (Max 10 Amps)
    • 4 x TTL / IGBT Ignition Drivers
    • 4 x GDI Drivers

Interfaces

  • 2 x Can 2.0B
  • 1 x Rs232 Output
  • 100 Mhz Full Duplex Ethernet For Connection To PC For Programming And Data Download

Memory

  • Up to 64MB Internal Logging Memory aswell as Onboard Laptop Logging

Power Supply

  • 6 to 20v input voltage range with reverse polarity protection
  • 3 x regulated 5V sensor supply outputs with protection

Physical

  • Operating Temperature -25 to +95 C
  • Dimensions 178 x 122 x 36 mm

Technical Drawings

syvecs_gdi4_pinouts_and_wiring_info

Syvecs GDI4 Pinouts & Wiring Instructions

Unsure what model ECU is right for you?

Please see the Syvecs model comparison below which highlights all of the main differences of the various models of Syvecs ECU’s.

Model Comparison

** Included from Factory

^GDI Injectors, requires normal injector output for signal to driver

+Build time choice

Here at Northampton Motorsport, we also offer a full wiring and fitting service as well as engine calibration on our in house Superflow AD30 2 wheel drive chassis dyno. For more information, please contact us and a member of our team would be happy to assist with your enquiry:

Contact Us

All ECU’s are configured to order so the lead times can vary. Estimated dispatch time within 10 working days.

Picture for illustration purposes only. Actual parts may differ slightly in appearance.