Ford Ecoboost (1.6L) Piper Rally Camshafts suitable for the 1.6 Litre Ecoboost engine.
The Ford Ecoboost engine was fitted to a wide range of Fords including the Fiesta, Focus, Explorer, Mustang and Ranger. It is also found in the Lincoln Corsair & MKC as well as used in kit cars and various forms of Motorsport.
- Application: Rally
- Power Band: 2500-8000
- Duration Inlet: 272°
- Duration Exhaust: 254°
- Valve Inlet Lift: .376″ (9.55mm)
- Valve Exhaust Lift: .331″ (8.39mm)
- Timing Inlet: 8 – 84
- Timing Exhaust: 47 – 27
- Full Inlet Lift: 128°
- Full Exhaust Lift: 100°
- TDC Inlet Lift: .008″ (0.22mm)
- TDC Exhaust Lift: .057″ (1.44mm)
- Valve Inlet Clearance: .010″ (0.25mm)
- Valve Exhaust Clearance: .012″ (0.30mm)
For more information, please see the spec sheet below.
This Ford Ecoboost (1.6L) Piper Rally Camshafts are CNC ground from a new blank camshaft.
Please Note: These camshafts are not suitable use use with standard O.E valve springs. Piper recommend the use of their Single Valve Springs & Retainer Kit with these camshafts.
Estimated dispatch time within 5 working days.
Picture for illustration purposes only. Actual parts may differ slightly in appearance.