Description
This Flex Fuel Sensor is for use with the ECUMaster Classic and Black ECU’s as well as any aftermarket ECU capable of reading an ethanol content sensor. It allows for blending of fuel, ignition, engine start, and boost control tables. This Flex Fuel Sensor kits is built around one of the most accurate ethanol content sensor on the market, capable of providing the ECU with an ethanol content and fuel temperature reading within a quarter of a second of start-up.
Each kit includes the ethanol content sensor and mating connector. Installation is straightforward; just install the sensor in the fuel feed or return line and connect three wires to switched 12 volts, ECU ground, and the output signal wire to the “cam sync 2” pin on the EMU Classic or the dedicated Flex Fuel pin on EMU Black. Care should be taken not to exceed the maximum flow rate of the sensor of 400 litres per hour, which may cause signal instability. In some applications, a bypass loop will need to be incorporated into the feed or return line to accommodate the ethanol content sensor.
Available with either standard 8mm push fittings on AN6 fittings, please make your selection in the options above.
Estimated dispatch time within 3 working days.
Picture for illustration purposes only. Actual parts may differ slightly in appearance.
